Model range dialog
The mold range dialog is the first dialog that pops-up when we hit the create model command
(Ctrl + M or menu option'Options->Create Model') while the mold file is loaded.
This dialog is used to specify what part of mold should be processed for creating the model.
Normally we would want to create the whole of the model.
But if we like, we can also choose to create only a section of it.
Sometimes, we would want to do this if the created model file becomes so large that it is difficult
to load the entire model for display.
-
Process
all
For each of the three axes, there are two options: process all and process from p1 to p2.
The default is process all. Use this
option to create the complete model.
-
Process
from
We can create a section of the model by specifying the exact range of mold points that should
be processed along the three axes. In this case, only that part of the model which corresponds
to the selected mold points will be created.
For e.g. if there are a total of 500 points along the X axis in the mold, and
we choose to generate model for the range X=1 to X=250, only the left
part of the model will be created.